|
|
|
Apna IT News |
Latest IT News :-> ApnaPakistani.Net  | | | |
While you are trying to upload videos to YouTube, you may notice the duration limit for each video clip, and it should be no longer than 15 minutes. If you shoot videos with AVCHD camcorders like Panasonic HDC-HS250 for particular event continuously, you may want to cut and split the MTS file into several clip the length supported by YouTube.
[B]Aunsoft [URL=http://www.aunsoft.com/mts-converter/]Panasonic AVCHD Converter[/URL][/B] is the right tool for you to handle your MTS/M2TS videos. It can convert MTS to MP4 for YouTube, and help you deinterlace 1080i video to 1080p video for HD display on YouTube. If you have long AVCHD videos and would like to upload to YouTube, just follow the guide below to cut MTS and convert to MP4 on Windows 7. Here I take Panasonic HDC-HS250 as an example.
[IMG]http://image.mxf-converter.com/201009/hdc-hs250-avchd-for-youtube.jpg[/IMG]
Step 1. Load [B]Panasonic HS250[/B] videos to Aunsoft MTS/M2TS Converter.
Connect Panasonic HS250 camcorder to computer via USB cable and transfer the .mts files from camcorder to Windows computer hard drive. Run Aunsoft MTS/M2TS Converter as the best [B][URL=http://www.aunsoft.com/mts-converter/]Panasonic HS250 to YouTube converter[/URL][/B], and click the "Add" button to load 1080i .mts videos.
Step 2. Choose HD MP4 output format.
Click the "Format" option, and navigate the mouse cursor to HD Video > H.264 HD Video(*.mp4) as output format. The Panasonic AVCHD converter will transcode Panasonic HS250 MTS to MP4 in HD.
[IMG]http://image.mxf-converter.com/201009/hdc-hs250-mts-mp4-youtube.jpg[/IMG]
Step 3. Cut MTS video.
Select the video on the list, click the "Editor" button, and go to the Trim tab. To cut video, just drag the small icons under the timeline, or enter value in the box for Start or End and click the "Set" button. Click the bottom OK button to save trimming MTS video.
[IMG]http://image.mxf-converter.com/201009/cut-hdc-hs250-mts-youtube.jpg[/IMG]
Under the Effect tab, you may notice the checkbox for Deinterlacing. Make sure the checkbox is ticke, and it is to deinterlace 1080i to 1080p.
Step 4. Convert 1080i MTS to 1080p MP4 for YouTube.
Click the convert button, and the Panasonic AVCHD converter will start converting [B][URL=http://www.aunsoft.com/mts-converter/]1080i MTS to 1080p MP4[/URL][/B] without interlacing issue on YouTube.
After the conversion is finished, you can easily log in your YouTube account and upload the output videos to YouTube for sharing.
[B]Tips:[/B]
1. If you import one file to the Aunsoft Panasonic AVCHD editor, you will get one file as output. If you want to cut and output videos with different time frame, you may load the .mts twice, and trim video with at different starting time and end time.
2. If you are on MacBook for iMac with Mac Tiger, Leopard or Snow Leopard, you may use the [B][URL=http://www.aunsoft.com/mts-converter-mac/]Mac Panasonic AVCHD converter[/URL][/B] to put camcorder videos to YouTube. |
|
|
|
|
|
|
|
|
|
|
[img]http://img836.imageshack.us/img836/3741/imgit.jpg[/img]
Anyone knows what font this is?
Thanks |
|
|
|
|
|
|
|
|
|
|
| (WIN) its the wierdest thing. installed win 7 pro (32bit) on aunts computer, and after a while realized was NOT able to access any secure sites with IE. Tried every setting possible--cleared SSL certificates, delete all temp files, reset IE back to defeualt settings and tried somemore -- disabled the fire wall, stil no joy. downloaded firefox and i'm able access all sites, also when i hook up my laptop to the router, i can access all sites. compared IE setting on laptop and desktop--all seem the same. google search reveals others with issues , with no clear resolution.....so i am posting it here to see what you guys think |
|
|
|
|
|
|
|
|
|
|
Hi
I just have a doubt. I want to know whether one can browse through RAM in laptop without using harddisk. If so could someone tell how to go about doing it.
thanks in advance folks. |
|
|
|
|
|
|
|
|
|
|
Hey guys! I am doing a temp job as a temporary IT Administrator. Fun times, right? Heck I'm going to college for German! Originally was told I was just going to be doing PC repair. Nope.
Anywho, a user wants to be able to sort her contacts by category (personal and business) when clicking the "to" field in a new message (screengrab below). She has one address book... the default Outlook 2003 address book.
Is there a way, in this view, to sort the contacts by category? or to only view the personal or business?[img]http://imgur.com/TKAO0.jpg[/img] |
|
|
|
|
|
|
|
|
|
|
| [youtube]1NxyFzNx-18[/youtube] |
|
|
|
|
|
|
|
|
|
|
| Is there any word on if they are going to start letting people redeem beta keys for xbox medal of honor beta? |
|
|
|
|
|
|
|
|
|
|
| So i was downloading TF2 off of steam and I lost internet at 96% and now it just says download starting... and I don't know how to maybe delete what i have downloaded so far for TF2 and maybe restart the download over. I don't really know where the steam apps folder is in mac i have done a search for steam but the file to start steam is the only thing that shows up. if any one has any suggestions that could possibly help it would be appreciated. |
|
|
|
|
|
|
|
|
|
|
| I'm having issues with my iMac i just got it and I keep losing my internet connection when I start to download stuff. I didn't have this problem when I had the PC on the network. I was using steam to download Team Fortress II and it stopped like 8 times during the download so I had to keep un plugging and re plugging the router in. I heard somewhere that you can dump the cache in the router and it should fix it. I don't know how to do that though. Also I heard that it could be the encryption and I dropped the encryption from WPA to WPA 2 and then down to none to see if that would do anything and sure enough it did nothing. I was wondering if anyone had any ideas. |
|
|
|
|
|
|
|
|
|
|
There's a new beta of Microsoft Security Essentials (version 2.0), which is available to anyone through [url=http://connect.microsoft.com]Microsoft Connect[/url].
[quote]New features in the beta of Microsoft Security Essentials include:
[b]Windows Firewall integration[/b] ? During setup, Microsoft Security Essentials will now ask if you would like to turn the Windows Firewall on or off.
[b]Enhanced protection for web-based threats[/b] ? Microsoft Security Essentials now integrates with Internet Explorer to provide protection against web-based threats.
[b]New protection engine[/b] ? The updated anti-malware engine offers enhanced detection and cleanup capabilities with better performance.
[b]Network inspection system*[/b] ? Protection against network-based exploits is now built in to Microsoft Security Essentials.[/quote]
A screenshot and a further description are available at this link: http://windowsteamblog.com/windows/b/bloggingwindows/archive/2010/07/20/beta-for-next-version-of-microsoft-security-essentials-now-available.aspx
I installed it, and so far is seems alright. MSE is still my favorite antivirus program. But as they progress with it, I hope they focus on keeping it lightweight and not introduce too much bloat. |
|
|
|
|
|
|
|
|
|
|
I have a brand new Dell Alienware Aurora ALX computer that uses Windows 7 (64 bit). My problem is the internet connection (COX) is not keeping a stable connection. Let me explain in more detail. Everytime I reboot my computer the event viewer shows this error:
[b]Event ID: 1001 Source: Dhcp-Client
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x904CE530350C. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
[/b]
At this time I am able to use the internet. However after a few minutes I start having this message appear in the modem log:
[b]IGMP: ERROR - Insufficient memory in msgblk buffer queue(0x944ce320), ERRNO=3997698
[/b]
Then this error appears in the Event Viewer:
[b]Event ID: 1014 Source: DNS Client Events
Name resolution for the name 6to4.ipv6.microsoft.com timed out after none of the configured DNS servers responded.
[/b]
At this time if I attempt to go to a web site (using Internet Explorer 8) I get this message:
[b]Internet Explorer can not display the web page.[/b]
If I refresh the page I can sometimes get to the web site.
If I just let the computer idle I start having a slew of those IGMP messages in the modem log and associated event viewer messages and still can not get to a web page.
I am using a Motorola SB5120 Surfboard cable modem. Here are the settings:
Downstream Value
Frequency 579000000 Hz
Signal to Noise Ratio 38 dB
QAM QAM256
Network Access Control Object ON
Power Level -1 dBmV The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
Upstream Value
Channel ID 2
Frequency 37800000 Hz
Ranging Service ID 141
Symbol Rate 2.560 Msym/s
Power Level 41 dBmV
Here is a copy of my modem's log:
2010-07-19 11:26:45 5-Warning IGMP: ERROR - Insufficient memory in msgblk buffer queue(0x944ce320), ERRNO=3997698
2010-07-19 10:22:51 7-Information DS multicast is not mapped to SAID
2010-07-19 10:22:51 7-Information B605.10 Map Reject - Downstream Traffic Flow Not Mapped to BPI+ SAID
2010-07-19 10:22:51 7-Information B601.0 SA Map State Machine Started
2010-07-19 10:21:49 5-Warning IGMP: ERROR - Insufficient memory in msgblk buffer queue(0x944ce320), ERRNO=3997698
2010-07-19 10:21:48 7-Information DS multicast is not mapped to SAID
2010-07-19 10:21:48 7-Information B605.10 Map Reject - Downstream Traffic Flow Not Mapped to BPI+ SAID
2010-07-19 10:21:48 7-Information B601.0 SA Map State Machine Started
2010-07-19 10:21:44 5-Warning IGMP: ERROR - Insufficient memory in msgblk buffer queue(0x944ce320), ERRNO=3997698
2010-07-19 10:21:43 7-Information DS multicast is not mapped to SAID
2010-07-19 10:21:43 7-Information B605.10 Map Reject - Downstream Traffic Flow Not Mapped to BPI+ SAID
2010-07-19 10:21:43 7-Information B601.0 SA Map State Machine Started
2010-07-19 10:21:42 5-Warning IGMP: ERROR - Insufficient memory in msgblk buffer queue(0x944ce320), ERRNO=3997698
2010-07-19 10:21:40 7-Information DS multicast is not mapped to SAID
2010-07-19 10:21:40 7-Information B605.10 Map Reject - Downstream Traffic Flow Not Mapped to BPI+ SAID
2010-07-19 10:21:40 5-Warning IGMP: ERROR - Insufficient memory in msgblk buffer queue(0x944ce320), ERRNO=3997698
2010-07-19 10:21:40 7-Information B601.0 SA Map State Machine Started
2010-07-19 10:21:40 5-Warning IGMP: ERROR - Insufficient memory in msgblk buffer queue(0x944ce320), ERRNO=3997698
2010-07-19 09:35:41 5-Warning D103.0 DHCP RENEW WARNING - Field invalid in response
2010-07-19 09:35:41 5-Warning DHCP: Renew: Another TFTP server IP address
I talked to a tech from Motorola about this problem. He said the problem is with the ISP (COX) not the modem.
I talked to the isp (COX) she said the problem is either the modem or the computer.
I talked to Microsoft Technical support (level 3 tech) he said it could be the modem but was not sure. He wants me to buy a new modem.
I talked to DELL (Level 1 tech) he said it could be a Microsoft Windows 7 issue so contact Microsoft.
I am at my wits end. Does ANYBODY here have any idea what is causing the IGMP error messages? Do I need a new modem? |
|
|
|
|
|
|
|
|
|
|
StarCraft II is now available for download:
http://beta-us.battle.net/en/info/digital-purchase
When the game is released on 7/27/2010, you can purchase it online and it will already be on your computer. |
|
|
|
|
|
|
|
|
|
|
Here's an interesting new power strip that's supposed to be safe even if it's underwater (or if you stick a metal object in it). Jolin will demonstrate for you. She speaks English fluently. 
[youtube]85Lq2cHWNvQ[/youtube]
Yes, it is great! 
[youtube]Br7cLycWZI8[/youtube]
[youtube]t4deJzVH4i4[/youtube]
And here's how it works:
[youtube]-w6vYlm4D00[/youtube]
The product can be purchased for $35 through this site: http://www.wetcircuits.com
It's interesting enough, but I wonder how many people won't catch that they are saying "power strip" and not "surge protector."  |
|
|
|
|
|
|
|
|
|
|
[size="1"][i]Linkr cannot be used in this community because it uses too many images for a signature. You're free to use it on other forums, and keep spreading it.[/i][/size]
[img]http://dev.bennny.com/projects/linkr/src_img/styles/default.png[/img]
[img]http://dev.bennny.com/projects/linkr/src_img/styles/white.png[/img]
[img]http://dev.bennny.com/projects/linkr/src_img/styles/default_iconed.png [/img]
[img]http://dev.bennny.com/projects/linkr/src_img/styles/white_iconed.png [/img]
[url="http://dev.bennny.com/projects/linkr"]Linkr[/url] is a signature banner, containing links to social networking websites of your choice. The [url="http://dev.bennny.com/projects/linkr"]Linkr[/url] may be used on any forum/board, with the use of BBCode containing images, and hyperlinks. To simplify the complexity of gathering up all the BBCode, I have put together a PHP script to generate all BBCode for your use. It takes a matter of seconds to fill out a few input fields, and submitting the form to retreat your custom BBCode. The [url="http://dev.bennny.com/projects/linkr"]Linkr[/url] is free to use by anyone. Visit the [url="http://dev.bennny.com/projects/linkr"]Linkr[/url] project website.
If you are interested in using the [url="http://dev.bennny.com/projects/linkr"]Linkr[/url], the hyperlink to the Linkr project website must remain intact with the “main” image. |
|
|
|
|
|
|
|
|
|
|
[youtube]zX09WnGU6ZY[/youtube]
Oooh! I want one!  |
|
|
|
|
|
|
|
|
Go Home |
|
|
|
